Best Black Friday Monitor Arm Deals

The best Black Friday monitor arm deals in 2026 cluster in the middle of the market: budget gas-spring single arms typically drop 30–50% (landing around $25–$60), mid-tier mechanical-spring arms fall 25–40% (roughly $60–$150), and premium Ergotron, Humanscale, and Colebrook Bosson Saunders models discount 15–30% — while heavy-duty arms rated above 30 lb, grommet-only mounts, and dual-ultrawide configurations usually see the shallowest cuts of the entire category. Black Friday 2026 falls on Friday, November 27, with Cyber Monday on November 30, and monitor-arm pricing normally starts softening in the first week of November, so the practical buying window runs about three and a half weeks.

What follows is a criteria-first buying guide: the six specs that determine whether an arm actually works on your desk (weight capacity, screen-size range, VESA compatibility, desk-clamp clearance, adjustability, cable management), the measurements you should take before you order anything, a decision matrix that maps your situation to a spec target, and then a full breakdown of every arm family worth watching when the discounts hit.

BFTOU Black Single Monitor Arm Adjustable Stand Monitor Mount up to 32 inches and 17.6 lbs, Computer Desk Mount with Clamp and Grommet Base

Included for 'Best Black Friday Monitor Arm Deals' because the listing specifies Computer Desk Mount with Clamp and Grommet Base, details this guide uses to compare options.

View on Amazon →

MOUNTUP Single Monitor Desk Mount Holds Screen up to 32 inch, Height Adjustable Monitor Arm, Full Motion Computer Monitors Stand with Clamp/Grommet Base, VESA Mounts Fit 4.4-19.8lbs Computer, Black

Included for 'Best Black Friday Monitor Arm Deals' because the listing specifies Height Adjustable Monitor Arm and Full Motion Computer Monitors Stand with Clamp/Grommet Base, details this guide uses to compare options.

View on Amazon →

Single Monitor Desk Mount, 19-34 inch Adjustable Full Motion Monitor Arm, Computer Monitor Stand Holder with Clamp and Grommet Base, Fits 4.4 to 19.8lbs Screens, VESA Mount Bracket, Black

Included for 'Best Black Friday Monitor Arm Deals' because the listing specifies 19-34 inch Adjustable Full Motion Monitor Arm and Computer Monitor Stand Holder with Clamp and Grommet Base, details this guide uses to compare options.

View on Amazon →

EVEO Premium Dual Monitor Mount 14"-32” Dual Monitor Arm VESA Bracket Adjustable Height Gas Spring Dual Monitor Stand, Screen Full Motion Dual Monitor Arm-Computer Monitor Stand for 2 Screens - Black

Included for 'Best Black Friday Monitor Arm Deals' because the listing specifies Black, details this guide uses to compare options.

View on Amazon →

What Black Friday Actually Discounts in Monitor Arms

Monitor arms are a strange discount category because the price ladder is steep and the discounts are uneven. The pattern repeats most years:

• Budget gas-spring arms ($25–$60 on sale): the deepest percentage cuts, often 30–50%. These are the $40–$90 single arms with a spring cylinder, a VESA plate, and a C-clamp. Inventory is deep, margins are wide, and brands compete hard on price.
• Mid-tier mechanical-spring and hybrid arms ($60–$150 on sale): 25–40% off. This is the sweet spot for most people — better pivots, metal where it counts, and a clamp that doesn’t flex.
• Premium arms ($110–$290 on sale): Ergotron LX, Ergotron MXV, Humanscale M2/M8, and Colebrook Bosson Saunders Flo and Ollin. Discounts run 15–30%, and the entry-level models in each premium line are the ones that move.
• Heavy-duty arms ($220–$400 on sale): Ergotron HX, Humanscale M10, CBS Wishbone. Discounts are real but shallow, usually 10–25%, because these sell to people who have already discovered they need them.
• Monitor-brand and desk-brand arms: Dell, HP, Uplift, and Flexispot arms are frequently bundled or discounted alongside the monitor or desk they attach to, which can beat standalone pricing if you’re buying both.

One structural note: the biggest single determinant of your final price isn’t the discount percentage, it’s whether you need a clamp or a grommet mount, and whether your monitor is under or over about 20 lb. A 40% discount on an arm that can’t hold your panel is worth nothing.

How to Judge a Monitor Arm Deal: The Six Specs That Matter

1. Weight capacity: match the arm to the monitor, not the screen size

Weight capacity is the spec that kills more purchases than any other. Manufacturers publish a range — for example, “7–25 lb” or “4.4–14 lb” — and both ends matter. Below the minimum, the spring or gas cylinder has too much force and the arm drifts upward no matter how you adjust it. Above the maximum, the arm sags and won’t hold position.

Real panel weights, which are almost never printed on the box in a useful way:

• 22-inch 1080p panel: roughly 5–7 lb with the stand removed
• 24-inch panel: roughly 7–10 lb
• 27-inch panel: roughly 9–13 lb
• 32-inch panel: roughly 13–18 lb
• 34-inch ultrawide: roughly 12–17 lb
• 38-inch ultrawide: roughly 15–20 lb
• 49-inch super ultrawide: roughly 30–36 lb

The counterintuitive part: a 34-inch ultrawide often weighs less than a 32-inch 16:9 panel of the same generation, because the ultrawide is thinner and the 32-inch tends to have a heavier backlight and chassis. Weigh your monitor with a luggage scale, or look up the “weight without stand” figure — that’s the number the arm cares about.

2. Screen-size range and why it lies

“Fits 13–27 inches” is a marketing range, not an engineering one. What actually matters is the combination of panel weight and the distance from the VESA mounting holes to the panel’s outer edge. A 32-inch panel with a shallow VESA recess can collide with the arm’s tilt housing when you tilt it down, even if it’s within the stated size range. A 27-inch panel with a deep, chunky back can hit the arm’s vertical pivot limit before it reaches the weight limit.

Practical rule: if the arm’s stated maximum screen size is exactly your monitor size, check the weight range first, then look for a “tilt clearance” note in the specs. If your monitor is at the top of both ranges, buy the next class up.

3. VESA compatibility and adapter math

Almost every monitor arm attaches via a VESA plate, and almost every monitor made in the last decade has one of two hole patterns:

• 75 × 75 mm — small panels, thin all-in-ones, some 22–24 inch displays
• 100 × 100 mm — the near-universal standard for 24–32 inch monitors

Some 34-inch and larger ultrawides use 200 × 100 mm, which requires either an arm with a wider plate or a VESA adapter bracket. Adapters are cheap (usually $15–$35) but they add 0.4–0.8 inches of depth between the panel and the arm, which shifts the center of gravity outward and eats into your weight headroom. If you need an adapter, subtract roughly 10% from the arm’s maximum capacity as a safety margin.

Two things to verify before buying: that your monitor’s VESA holes are exposed and not recessed behind a curved back panel, and that the screws you need are the right length. Arms ship with M4 screws in several lengths, but monitors with recessed holes sometimes need M4 spacers, which are usually included with the arm and rarely mentioned on the box.

4. Desk-clamp clearance and grommet fit

This is where most returns happen. A C-clamp arm needs three things from your desk:

• Thickness within range. Many clamp arms fit desks from about 0.4 to 2.0 inches (10–50 mm); heavier arms often go to 2.4 inches (60 mm). Glass, honeycomb-core, and very thin hollow-core tops are the problem cases.
• Vertical clearance below the edge. The clamp body and its tightening screw typically need 2.5–3 inches (65–75 mm) of clear space beneath the desk edge. A drawer unit, a cable tray, or a crossbar directly under the edge will block the clamp.
• Depth intrusion. The clamp occupies roughly 1.5–2.5 inches of depth measured back from the desk edge, and the arm’s base adds another 1–2 inches behind that.

Grommet mounts solve the drawer-clearance problem by passing a bolt through an existing hole in the desk. They need a hole diameter usually between 0.4 and 2.0 inches (10–50 mm), and 1.6–3.5 inches of clear space underneath for the bolt and nut. If your desk has a grommet hole but a shallow modesty panel behind it, measure the under-desk depth before committing.

One more measurement that almost nobody takes: the distance from the desk’s back edge to the wall. A folding arm needs 3–6 inches behind the desk to swing its elbow rearward. Push a desk flush against a wall and you lose most of the arm’s horizontal reach, which is exactly the feature you paid for.

5. Adjustability: what “full motion” really means

Every arm claims “full motion.” The differences live in the details:

• Height adjustment type. Mechanical springs hold tension with a coiled spring and a screw adjustment; gas springs use a pressurized cylinder. Gas springs move more smoothly and adjust with one hand; mechanical springs hold their calibration longer and don’t lose pressure over years.
• Tilt range. Look for at least +70° up and −45° down if you want to use a monitor in portrait or a low-angle drafting position. Arms with ±15° tilt only exist for fixed-height wall-mounted signage.
• Rotation. 360° rotation at the VESA plate is what lets you flip to portrait. If the arm lists 180°, you can’t rotate a landscape panel to portrait without unmounting it.
• Pan/swivel at the base. 180° or more at the base lets you swing the monitor aside to clear the desk. Arms with a fixed base force you to move the whole panel by hand.
• Height range above the desk. A single arm typically lifts a panel’s VESA center from about 4 inches to 16–20 inches above the desk surface. For seated work, you want the monitor’s top edge at or slightly below eye level, which with a 29–30 inch desk and a 44–48 inch seated eye height usually means a VESA center around 10–14 inches above the desk.

6. Cable management: the spec nobody lists

Cable management is the difference between an arm that looks like furniture and an arm that looks like a mistake. Three levels exist:

• Clip-on channels. Plastic clips that snap onto the arm segments. Cheap, effective, and the first thing to break.
• Integrated channels with removable covers. A groove machined into the arm body with a snap-in cover. This is the standard on premium arms and the feature that keeps DisplayPort and power cables from hanging in a loop under your desk edge.
• Internal routing through hollow arm segments. The cleanest option and the rarest. Cables pass inside the arm and exit at the base, which matters most on dual arms where four cables otherwise cross the desk’s midline.

Practical cable math: a single-monitor setup needs 2 cables (power and video), a dual setup needs 4, and a laptop-dock setup needs 3–5 including USB. An arm whose channel fits one cable comfortably will bulge with three. If you run a dock, look for arms rated for 0.3-inch (7–8 mm) cable diameter or larger.

Quick-Reference Spec Table: Monitor Arm Classes Compared

Construction Trade-Offs: What the Arm Is Actually Made Of

Two arms can look identical in photos and behave completely differently after two years. The difference is material and mechanism.

The trade-off is not simply “spend more.” A cheap arm on a monitor you position once and never touch can last a decade, because nothing is cycling the mechanism. A premium arm on a panel you swing aside twice a day, every day, earns its price in the third year. Buy to your movement pattern, not to the spec sheet’s ceiling.

One material detail worth knowing: powder-coated steel plates hold paint well but chip at the screw holes, and chipped paint on a steel VESA plate is where rust starts in humid rooms. Die-cast aluminum plates don’t rust, which is a genuine argument for the premium tier in coastal or basement setups.

Decision Matrix: Match the Arm to Your Situation

Measure Your Setup Before You Buy: Real Numbers

Take these five measurements with a tape measure before you order. They take six minutes and prevent almost every monitor-arm return.

• Desk thickness at the mounting edge. Measure the actual top, not the apron. A 1-inch top with a 2-inch apron means your usable clamp thickness is 1 inch, not 3.
• Clear space under the desk edge. Drop the tape from the underside of the top to the first obstruction — drawer, crossbar, or cable tray. You need 2.5–3 inches.
• Distance from the desk’s back edge to the wall. Under 3 inches means a folding arm will be limited; under 2 inches, plan on a low-profile or wall-adjacent design.
• Monitor weight without the stand. Use a luggage scale on the panel or the manufacturer’s “weight without stand” figure. Add 1–2 lb for cables, a webcam, and a light bar.
• Your seated eye height and desk height. A standard desk is 28–30 inches tall. Seated eye height for most adults is 44–48 inches from the floor. The gap between those two numbers — roughly 14–20 inches — is the height range your arm needs to cover.

Two more numbers that shape the result: a 24-inch desk depth is the minimum for an arm, and 30 inches is comfortable, because the clamp and the arm base consume 2–4 inches of depth and the monitor’s own thickness takes another 1–2 inches. And if you use a light bar or a webcam, add about 1 lb to the panel weight and check that the arm’s tilt housing doesn’t collide with the light bar’s mounting clip at full tilt.

The Picks: Best Black Friday Monitor Arm Deals by Category

The sections below cover every arm family worth watching in 2026, with the specs that matter for each and what to expect from Black Friday pricing.

Ergotron LX Desk Monitor Arm (single)

The LX is the reference point for the category. It uses a constant-force spring rather than a gas cylinder, which means it holds its calibration for years and doesn’t drift as the room warms up. Manufacturer specs put it at roughly 7–25 lb (3.2–11.3 kg) with support for panels up to about 34 inches, on VESA 75×75 and 100×100 plates.

• Weight capacity: roughly 7–25 lb
• Screen range: up to about 34 in, including many ultrawides in the 12–17 lb band
• Clamp: fits desks roughly 0.4–2.4 in thick; grommet mount also available
• Adjustability: full height, tilt, pan, and 360° rotation at the plate for portrait mode
• Cable management: integrated channel with removable cover along both arm segments

The reason to pick the LX over a budget arm is the tension adjustment: a single screw sets the lift force, and it holds. On a sit-stand desk that cycles up and down several times a day, that stability is the difference between an arm that stays put and one that slowly droops. The reason to hesitate is price — the LX normally sits in the $180–$230 band, and Black Friday typically brings it to roughly $110–$160.

Best for: one 24–32 inch panel, a sit-stand desk, and anyone who wants to buy once. Skip if: your monitor is under 7 lb, where the arm’s minimum tension is more than you need, or over 25 lb.

Ergotron LX Dual (side-by-side and stacking)

Ergotron sells the LX in two dual configurations: side-by-side for two panels at the same height, and stacking for one panel above the other. Both use the same constant-force mechanism as the single, rated around 7–20 lb per arm, with per-arm height and tilt adjustment so you can align two panels of different sizes.

• Weight capacity: roughly 7–20 lb per arm
• Reach: each arm extends roughly 20–25 in from the base
• Clamp: same 0.4–2.4 in range; a single base carries both arms, so clamp pressure is concentrated at one point
• Cable management: two channels, one per arm, plus a shared route down the base

The practical issue with any dual arm is the base. Both arms load a single clamp, so the clamp pad and the desk top take roughly double the leverage. On a hollow-core or honeycomb desk, add a spreader plate — a rigid plate 3–4 inches wide under the desk — to distribute the load. On solid wood or laminate over particleboard, the standard pad is usually fine.

Best for: two 24–27 inch panels, matched or mismatched. Skip if: your two monitors together exceed about 40 lb, in which case a heavy-duty dual or two separate heavy-duty singles is the better structure.

Ergotron HX Desk Monitor Arm

The HX is the arm you buy for a 49-inch super ultrawide. Spec sheets list roughly 20–42 lb (9.1–19.1 kg) of capacity, with a heavy-duty tilt pivot designed for the deep, curved chassis of large ultrawides. That pivot matters: a 49-inch panel is 47 inches wide, and the leverage at the tilt joint is enormous.

• Weight capacity: roughly 20–42 lb
• Screen range: up to about 49 in, including super ultrawides in the 30–36 lb band
• VESA: 75×75 and 100×100 standard; many 49-inch panels use 100×100, but check yours
• Clamp: roughly 0.4–2.4 in; a spreader plate is strongly recommended at this load
• Cable management: integrated channels sized for thicker display cables

The HX is also the arm most likely to reveal a weak desk. Forty pounds on a single clamp point is a lot of torque on a 1-inch top. If your desk is particleboard with a paper laminate, consider a grommet mount instead of a clamp, which spreads the load through a bolt rather than concentrating it at an edge.

Best for: 49-inch super ultrawides, heavy 32-inch panels with thick chassis, and anyone who has already had a cheaper arm sag. Skip if: your monitor is under 20 lb — the minimum tension is too high and the arm will fight you.

Ergotron MXV

The MXV sits between budget arms and the LX. It uses a gas spring, which makes height changes smoother and one-handed, and it’s rated in the roughly 7–20 lb band with support for panels up to about 32 inches. It’s a good compromise if you want the Ergotron build quality without the LX price.

• Weight capacity: roughly 7–20 lb
• Screen range: up to about 32 in
• Adjustability: full motion with a lighter touch than the LX’s constant-force spring
• Cable management: integrated channel

The trade-off against the LX is longevity under constant cycling. Gas springs lose a little pressure over years of daily movement; constant-force springs don’t. For a desk you adjust twice a day, the difference is negligible. For a sit-stand desk cycled ten times a day, the LX will outlast it.

Best for: a 27–32 inch panel on a fixed-height desk, where smooth one-handed adjustment matters more than a decade of calibration.

Ergotron Trace

Trace is Ergotron’s design-forward line: a slimmer arm profile, a lower visual footprint, and a mechanism that hides more of the hardware behind the panel. It’s rated in roughly the 7–25 lb range and is aimed at people who care how the arm looks from across the room as much as how it performs.

• Weight capacity: roughly 7–25 lb
• Profile: lower and more sculpted than the LX, with fewer visible fasteners
• Cable management: integrated routing, designed to disappear behind the panel
• Clamp: standard desk-edge clamp with a comparable thickness range to the LX

Trace discounts are usually shallower than LX discounts because the line is newer and inventory is thinner. If you find it near LX pricing on Black Friday, it’s the better-looking arm; if it’s meaningfully more, the LX is the better value.

Humanscale M2

Humanscale’s entry arm is built around a counterbalance mechanism rather than a gas cylinder, and it’s rated in roughly the 4–12 lb band — light panels only. It’s the arm to consider for a 22–24 inch monitor on a desk where aesthetics matter and the panel is genuinely light.

• Weight capacity: roughly 4–12 lb
• Adjustability: counterbalance lift, tilt, pan, and rotation
• Build: aluminum and die-cast components with a notably small joint profile
• Cable management: integrated clips and channel

The M2’s limitation is headroom. Put a 13 lb panel on it and you’re above the rated maximum, which shows up as sag at full extension. Buy it for a light panel, not a mid-weight one.

Humanscale M8

The M8 is the workhorse of the Humanscale line, rated roughly 12–20 lb and designed for 24–32 inch panels. It uses a similar counterbalance approach with a heavier spring and a more substantial VESA plate.

• Weight capacity: roughly 12–20 lb
• Screen range: 24–32 in typical
• Adjustability: full motion with tool-assisted tension adjustment
• Cable management: integrated routing through the arm body

Humanscale arms are frequently specified in commercial offices, which means they show up in volume and sometimes land in resale channels at well below retail. Black Friday discounts on the M8 are typically modest — 15–25% — because the brand competes on specification rather than price.

Best for: a 27-inch panel in a room where the arm is visible and the finish matters.

Humanscale M10

The M10 is Humanscale’s heavy-duty arm, rated up to roughly 40 lb and built for large-format and curved displays. It’s the direct competitor to the Ergotron HX, with a similar weight class and a comparable clamp requirement.

• Weight capacity: up to roughly 40 lb
• Screen range: large ultrawides and heavy 32-inch panels
• VESA: standard patterns, with adapters for wider bolt spacing
• Clamp: heavy-duty; use a spreader plate on thin or hollow tops

At this weight class, the arm’s structure matters less than your desk’s. Both the M10 and the HX put 30–40 lb of leverage on a single clamp point. If your desk top is under 1 inch thick or has a hollow core, plan on a grommet mount or a steel reinforcement plate before you buy either.

Humanscale M/Flex

M/Flex is a modular multi-monitor system: a single base with a crossbar and two to six arm segments, each independently adjustable. It’s the option for trading desks and editing bays where three to six panels need to be aligned to a common height.

• Configuration: two to six panels from one base
• Weight: typically 5–20 lb per arm depending on the segment chosen
• Mount: heavy clamp or grommet; the base load grows with each added arm
• Cable management: routed along the crossbar and down the base

Multi-monitor systems are where desk structure becomes non-negotiable. Six arms on one base can put 60–100 lb of leverage on a single clamp. That’s a grommet mount and a solid-wood or steel-frame desk, not a clamp on a hollow top.

Colebrook Bosson Saunders Flo

CBS is part of the Herman Miller group and Flo is its best-known arm: a slim, gas-spring design rated roughly 6–20 lb, with a distinctive hinge that keeps the arm close to the desk. It’s widely specified in design studios, which tells you something about how it looks.

• Weight capacity: roughly 6–20 lb
• Screen range: 24–32 in typical
• Adjustability: gas-spring lift with a wide tilt and pan range
• Cable management: integrated channel with a clean exit at the base
• Clamp: desk clamp and grommet options, with a bolt-through version for thicker tops

Flo’s party trick is the way it folds flat against the desk when pushed back, which matters in small rooms where a 3-inch arm profile at rest is the difference between clearing a chair and not. Discounts on CBS arms are usually in the 15–25% range.

Colebrook Bosson Saunders Ollin

Ollin is the arm with a tension gauge — a small indicator on the gas spring that shows whether the arm is set correctly for the panel’s weight. That single feature removes the most common setup mistake, which is an arm adjusted by feel that drifts for weeks afterward.

• Weight capacity: roughly 6–20 lb
• Adjustability: gas-spring lift with a visible tension indicator
• Profile: low, with a narrow base that suits shallow desks
• Cable management: integrated routing

If you’ve ever spent twenty minutes fiddling with a tension screw and still ended up with a drooping monitor, Ollin’s gauge is worth the premium. It’s the most useful single feature in the premium tier.

Colebrook Bosson Saunders Wishbone

Wishbone is CBS’s heavy-duty design, built around a crossbar structure that supports larger panels with a lower visual profile than a conventional heavy arm. It’s rated in roughly the 18 lb and up range depending on configuration, and it’s aimed at large-format displays.

• Weight capacity: heavy-duty class, roughly 18–30 lb depending on configuration
• Structure: crossbar-based, which distributes load across a wider base footprint
• Mount: clamp or grommet, with the wider base reducing point load on the desk

The crossbar structure is the interesting part: by spreading the mounting load across a wider footprint, it puts less concentrated stress on a single clamp point than a conventional single-post heavy arm. On a thin desk, that’s a genuine structural advantage.

Chief Kontour K1C and K2C (Legrand AV)

Chief’s Kontour line is built for commercial installs — conference rooms, control rooms, retail — which means the mechanisms are rated for a lot of movement and the parts are serviceable. The single-arm K1C and dual-arm K2C are the consumer-adjacent models, rated roughly in the 5–30 lb band depending on the variant.

• Weight capacity: roughly 5–30 lb depending on model
• Adjustability: dynamic height adjustment with a long vertical travel
• Build: steel and aluminum with commercial-duty pivots
• Mount: clamp and grommet, with wall-mount variants in the same family

Kontour arms often look plain next to Ergotron and CBS designs, and that’s the point — they’re specified for function. On Black Friday they’re worth watching if you want commercial durability without a design premium.

Dell MSA20 and MDA20 monitor arms

Dell’s single and dual arms are designed to pair with Dell displays. Many Dell monitors have a proprietary quick-release slot in addition to VESA holes, and Dell’s arms use a bracket that snaps into it, which makes installation faster than threading four screws. The arms also include a standard VESA plate for non-Dell panels.

• Compatibility: best with Dell monitors that have the built-in mounting slot; VESA plate covers other brands
• Weight class: typically the 10–20 lb band, suited to 24–27 in panels
• Adjustability: full motion with cable routing through the arm
• Deal pattern: frequently discounted alongside Dell monitors and bundles

The bundle is the reason to care. If you’re buying a Dell monitor during Black Friday, the arm is often discounted more steeply as an add-on than as a standalone purchase, and the snap-in mount genuinely saves time.

Skip if: you don’t own a Dell monitor and want the widest compatibility — a universal arm is a safer bet.

HP single and dual monitor arms

HP sells single and dual arms built around the same idea as Dell’s: a bracket that mates with HP displays, plus a VESA plate for everything else. They’re rated in the mid-weight band and are typically priced below Ergotron equivalents.

• Compatibility: optimized for HP displays, VESA-compatible with others
• Weight class: typically 10–20 lb
• Adjustability: full motion with integrated cable routing
• Deal pattern: strongest when bundled with an HP monitor

These are sensible, unglamorous arms. If you already own an HP monitor and find the arm bundled at a steep discount, it’s a straightforward buy. If you’re starting from scratch, a universal arm gives you more flexibility later.

Uplift monitor arms

Uplift sells its own single and dual arms, usually as accessories to its standing desks, rated roughly in the 8–20 lb band. The appeal is integration: the arm is designed to work with the desk’s grommet holes and cable management, and it’s often discounted when bought with a desk.

• Weight capacity: roughly 8–20 lb
• Mount: clamp and grommet, sized to Uplift desk tops
• Cable management: designed to feed into the desk’s existing routing

If you’re buying a standing desk during Black Friday, check the arm bundle price before buying a standalone arm — the combined discount is often better than either item alone.

Flexispot monitor arms

Flexispot takes a similar approach: budget-to-mid arms sold alongside its standing desks, typically rated in the 8–20 lb band with gas-spring lift and a standard clamp. They’re the value option among desk-brand arms.

• Weight capacity: roughly 8–20 lb
• <

  Related Guides

  • Best Black Friday Game Subscription Deals
  • Best Black Friday Athletic Wear Deals
  • Best Black Friday Smart Smoke Detector Deals
  H

  Homestylzz Editorial Team

  We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
  Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
  Best Black Friday Monitor Arm DealsCheck price on Amazon
  More ways to save on Amazon

  • ▸ Try Amazon Prime — free 30-day trial
  • ▸ Start an Audible Premium Plus free trial
  • ▸ Read free with Kindle Unlimited